Clean your wall or surface
Be sure that the surface you are applying the Vinyl Wall Art Decal to is: smooth, dry and free of
dust and dirt. Positive Spaces decals can be applied to walls, wood, glass, concrete, metal or any
smooth, dry surface. Vinyl Wall Art Decals are removable but may not be repositioned or reused.
Do not apply to freshly painted walls! Wait a minimum of 2 weeks after painting.
Lay each Positive Spaces Decal on a flat surface, graphic side down. Press firmly over the entire
decal with the edge of a credit card or similar object. You are re-activating the bond between the
decal and the transfer tape.
Plan your layout
Arrange your Positive Spaces decal on your surface using masking tape (Use top edge for longer graphics to
prevent wandering and crooked applications), do not remove the white backing until you are happy with your layout.
Apply the decal
Flip the decal up. Starting from any corner, slowly peel the white backing away from the transfer
tape, the vinyl decal should be sticking to the transfer tape. If some of the decal remains stuck to
the white backing, stop. Rub the decal in that area and slowly continue peeling until you have about
4 inces of exposed vinyl and squeeze the exposed vinyl to the surface.
Peel the white backing away to about half the length of the decal.
carefully move your hand or squeegee slowly across the decal. Repeat the previous step for the last half of the decal,
be careful to keep the paper loose to allow the transfer paper to conform to the surface smoothly and naturally.
Be sure to squeeze every part of the decal out to the edges.
With your finger or squeegee finish the application by rubbing over the entire graphic to remove any air bubbles.
Once you have removed the air bubbles carefully remove the transfer tape making sure that the decal is sticking to your surface
and not the transfer tape.
Warning: Vinyl Wall Art is not responsible for any damage caused by applying or
removing a decal from any surface. Apply Positive Spaces decals at your own risk
